OFFICIAL XPF MAP PREVIEW
Schrack NA96 Modbus Register Map
Official Modbus Monitor XPF preview for the Schrack NA96 power meter, with 12 representative voltage, current, power signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Phase 1 phase voltage mV | 400769 | INT32 | V | Voltage |
| Phase 1 current mA | 400781 | INT32 | - | Current |
| 3phase active power | 400793 | INT32 | kW | Power |
| 3phase positive reactive energy | 400835 | INT32 | kWh | Energy |
| Frequency Hz | 400825 | UINT16 | Hz | Frequency |
| 3phase peak maximum demand | 400852 | INT32 | kW | Demand |
| Output relay status | 400833 | UINT16 | - | Status |
| Phase 1 thd vl | 400912 | UINT16 | - | Harmonics |
| 3phase positive active enerqy | 400805 | INT32 | - | General |
| Phase 2 phase voltage mV | 400773 | INT32 | V | Voltage |
| Phase 3 phase voltage mV | 400777 | INT32 | V | Voltage |
| Phase 2 current mA | 400785 | INT32 | - | Current |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built Schrack NA96 map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF