OFFICIAL XPF MAP PREVIEW
SATEC Powermeters Modbus Register Map
Official Modbus Monitor XPF preview for the SATEC Powermeters power meter, with 12 representative power, voltage, current signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Voltage l1l12 V | 400256 | UINT16 | V | Voltage |
| Current l1 A | 400259 | UINT16 | A | Current |
| Kw l1 kW | 400262 | UINT16 | - | Power |
| Kwh import low kWh | 400287 | UINT16 | kWh | Energy |
| Frequency Hz | 400279 | UINT16 | Hz | Frequency |
| Voltage l2l23 V | 400257 | UINT16 | V | Voltage |
| Voltage l3l31 V | 400258 | UINT16 | V | Voltage |
| Current l2 A | 400260 | UINT16 | A | Current |
| Current l3 A | 400261 | UINT16 | A | Current |
| Kw l2 kW | 400263 | UINT16 | - | Power |
| Kw l3 kW | 400264 | UINT16 | - | Power |
| Kvar l1 kvar | 400265 | UINT16 | - | Power |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built SATEC Powermeters map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF