OFFICIAL XPF MAP PREVIEW
Saci AHM1 Modbus Register Map
Official Modbus Monitor XPF preview for the Saci AHM1 power meter, with 12 representative power, voltage, current signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Positive-sequence component of voltage V | 300518 | INT16 | V | Voltage |
| Average current A | 300064 | FLOAT32 | - | Current |
| P1 kW | 300026 | FLOAT32 | - | Power |
| Import active energy kWh | 300066 | FLOAT32 | kWh | Energy |
| F Hz | 300058 | FLOAT32 | - | Frequency |
| PF1 | 300050 | FLOAT32 | - | Power Factor |
| Max demand value -I1 A | 300238 | FLOAT32 | kW | Demand |
| State of digital input 0off 1on bit0DI1 bit1DI2 | 304676 | INT16 | - | Status |
| THD-V1 | 300528 | INT16 | - | Harmonics |
| V1 V | 300006 | FLOAT32 | - | General |
| P2 kW | 300028 | FLOAT32 | - | Power |
| P3 kW | 300030 | FLOAT32 | - | Power |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built Saci AHM1 map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF