OFFICIAL XPF MAP PREVIEW
Lifasa MCA PLUS II Modbus Register Map
Official Modbus Monitor XPF preview for the Lifasa MCA PLUS II power meter, with 12 representative power, voltage, current signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| L1 phase voltage V | 300000 | UINT32 | V | Voltage |
| L1 current mA | 300002 | UINT32 | - | Current |
| L1 active power W | 300004 | UINT32 | kW | Power |
| Consumed active energy kW DC-DD | 300094 | UINT32 | kWh | Energy |
| L1 frequency Hz | 300060 | UINT32 | Hz | Frequency |
| Maximum demand I AVG mA | 300086 | UINT32 | kW | Demand |
| 2nd order harmonic | 302634 | UINT32 | - | Harmonics |
| Cos L1 | 300014 | UINT32 | - | General |
| L1 inductive power var | 300006 | UINT32 | kW | Power |
| L1 capacitive power var | 300008 | UINT32 | kW | Power |
| L1 apparent power VA | 300010 | UINT32 | kW | Power |
| L1 power factor | 300012 | UINT32 | PF | Power |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built Lifasa MCA PLUS II map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF