OFFICIAL XPF MAP PREVIEW
ENTES MPR2 Series Modbus Register Map
Official Modbus Monitor XPF preview for the ENTES MPR2 Series power meter, with 12 representative voltage, current, power signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Voltage L1 N V10 | 400000 | UINT32 | V | Voltage |
| Current L1 mA | 400014 | UINT32 | A | Current |
| Active power L1 N W | 400026 | FLOAT32 | kW | Power |
| Consumed active energy L1 Wh | 400200 | INT64 | kWh | Energy |
| Measured frequency Hz 100 | 400024 | UINT32 | Hz | Frequency |
| Quadrant 1 total reactive powe demand Var10 | 401208 | FLOAT32 | kW | Demand |
| Input status | 400158 | UINT32 | - | Status |
| Temperature input 1 C | 400138 | FLOAT32 | degC | Temperature |
| Total harmonic distorsion VL1 | 402006 | UINT32 | - | Harmonics |
| Cosphi L1 | 400082 | INT32 | - | General |
| Voltage L2 N V10 | 400002 | UINT32 | V | Voltage |
| Voltage L3 N V10 | 400004 | UINT32 | V | Voltage |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built ENTES MPR2 Series map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF