OFFICIAL XPF MAP PREVIEW
Electrex Flash 96 Modbus Register Map
Official Modbus Monitor XPF preview for the Electrex Flash 96 power meter, with 12 representative voltage, current, power signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Phase to neutral voltage thd | 400200 | FLOAT32 | V | Voltage |
| Line current thd | 400206 | FLOAT32 | - | Current |
| Phase active power W | 400234 | FLOAT32 | kW | Power |
| Hold counter import active energy kWh10 | 400311 | UINT32 | kWh | Energy |
| Total avg import | 400278 | FLOAT32 | - | Communication |
| Hold counters in progress interval elapsed time s | 400308 | UINT16 | - | General |
| Phase to neutral voltage thd | 400202 | FLOAT32 | V | Voltage |
| Phase to neutral voltage thd | 400204 | FLOAT32 | V | Voltage |
| Line current thd | 400208 | FLOAT32 | - | Current |
| Line current thd | 400210 | FLOAT32 | - | Current |
| Voltage input frequency Hz | 400212 | FLOAT32 | V | Voltage |
| Phase to neutral voltage rms amplitude V | 400214 | FLOAT32 | V | Voltage |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built Electrex Flash 96 map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF