OFFICIAL XPF MAP PREVIEW
Continental Control Systems WattNode Modbus Register Map
Official Modbus Monitor XPF preview for the Continental Control Systems WattNode power meter, with 12 representative voltage, power, energy signals.
Register preview
This public preview shows 12 representative read-oriented signals. The complete official map is available in Modbus Monitor XPF.
| Signal | Address | Type | Unit | Category |
|---|---|---|---|---|
| Average phase to neutral voltage V | 401017 | FLOAT32 | V | Voltage |
| Rms current phase A A | 401163 | FLOAT32 | A | Current |
| Real power sum of active phases W | 401009 | FLOAT32 | kW | Power |
| Total net bidirectional energy kWh | 401001 | FLOAT32 | kWh | Energy |
| Total positive energy kWh | 401003 | FLOAT32 | kWh | Energy |
| Real power phase A W | 401011 | FLOAT32 | kW | Power |
| Real power phase B W | 401013 | FLOAT32 | kW | Power |
| Real power phase C W | 401015 | FLOAT32 | kW | Power |
| Rms voltage phase A to neutral V | 401019 | FLOAT32 | V | Voltage |
| Rms voltage phase B to neutral V | 401021 | FLOAT32 | V | Voltage |
| Rms voltage phase C to neutral V | 401023 | FLOAT32 | V | Voltage |
| Average line to line voltage V | 401025 | FLOAT32 | V | Voltage |
Addressing note
Display address copied from the official XPF map preview. Modbus reference-number and zero-based offset conventions vary by device; verify the manufacturer manual before polling or writing.
Need the complete map?
Open the pre-built Continental Control Systems WattNode map in Modbus Monitor XPF for the full register set, live polling, logging, and dashboards.
Open full map in XPF